Standalone waterproof rfid metal single door keypad rfid access control system with alarm

Standalone waterproof rfid metal single door keypad access control with alarm

Doorbell button:	1
Interface to an alarm	1
Add-in Reader Interface	TCP/IP
Size:	2 readers
Unlock relay:	1
Electric lock output:	Wiegand 26 /32/34 (Motorola, , EM, 13.56Mhz, TI, Fingerprint, Handkey, IRIS…)
Alarm output:	1-600 Seconds Adjustable
Output short-circuit protection time:	No Limitation
Effective Cards:	ACCESS
Ambient temperature:	100M for TCP/IP
Relative humidity:	-40 - 70
Password	12 VDC
Compatible Cards	10,000
Card Reading Distance	30,000
Electric locking interface	Flash ROM, no data loss
Open access	100m

Character of this access control reader  

-1, Anti-theft alarm output for external alarm device
-2, With built-in-anti-theft equipment
-3, Users can reset private passwords
-4, Use keypad to delete lost cards for safety
-5, Strong Zinc Alloy Electroplated anti-vandal case
-6, IP68 Waterproof design for outdoor use
-7, Capacity: 2000 user's cards, 2000 codes
-8, Access ways: Cards, code, card with code
-9 Short-circuit protect: When relay or alarm output short circuit, it will shut up in 0.1ms
-10, Memory protects programmed information in case of power loss
-11, Adjustable Door Relay time 0~99 seconds
-12, can be programmed for use with a Wired doorbell
-13, Adjustable Door Output time, Alarm time,Door Open time
-14, WG output W26 for card and W34 for codes
-15, Strong standalone function device can be used as WG26 reader alone
-16, Lower power: Static current less than 30mA



This reader can work work as a stand alone RFID access control reader ,also it can work as a normal wiegand 26 reader which can connect to the control board to control the door . Following is the wire connection of the 2 working mode . 



Related Products


Company Information