Electric Strike Manufacturers

ACM is Electric Strike manufacturer and suppliers, Our Electric Strike factory in Shenzhen China, ACM is your reliable business partner in Electric Strike industry.

Electric Strikes are an alternative to a maglock. You might choose an electric strike over a maglock for aesthetic reasons, but you might also choose one if you would rather that the door was “Fail Locked/Fail Secure” when power is cut. A lot of electric strikes offer both options and it’s a simple case of moving a screw in the body of the strike to change the operation. We supply a variety of 12V DC and 24V AC/DC strikes that can be morticed or rim mounted (product dependent). Some are heavier duty than others, so it’s really important that you consider the amount of traffic that will be passing through the door.
An electric strike is an access control device used for door frames. It replaces the fixed strike faceplate often used with a latch (also known as a keeper). Like a fixed strike plate, it normally presents a ramped or beveled surface to the locking latch allowing the door to close and latch just like a fixed strike would. However, an electric strike's ramped surface can, upon command, pivot out of the way when the lock on the door is in the locked position and the door is opened, allowing a user to pull/push the door to open it without operating the mechanical lock or using a mechanical key. After the door is opened past the keeper, the keeper returns to its standard position and re-locks when power is removed or applied, depending upon the strike's configuration.